Sunday, 3 December 2017

FLIGHT COLLISION AVOIDANCE USING GPS BASED INTELLIGENT BEACON SYSTEM


project center in Tirunelveli 


Collision in Aviation is an unexpected accident in which two or more flights come into unplanned contact during flight. Owing to the relatively high velocities involved and the likelihood of subsequent impact with the ground or sea, very severe damage or the total destruction of at least one of the aircraft involved usually results. The potential for these collisions is increased by deviations from flight paths and the lack of collision-avoidance systems. Although a rare occurrence in general due to the vastness of open space available, collisions often happen near or at airports due to communication towers or any ancient tall buildings. The project is proposing a collision avoidance system for the aviation system. The Global position system (GPS) is responsible to locate the longitude and latitude of the accident zones like communication tower or tall buildings nearby. The embedded controller is casting as a brain for the proposed beacon system inside the flight. The beacon system can intimate the pilot while crossing the dangerous zone. The system also able to recognize the flight-to-flight collision with the help of sensors array fixed on the each flight body. This arrangement can alert the beacon system if there are any symptoms detected for collision. This intelligent beacon system is alerting the pilot by means of voice or alarm.  Thus the proposed collision avoidance is profitable vigilant system for avoiding the unnecessary flight collisions. 

No comments:

Post a Comment